Unitech TS100 User Manual

- 16 -
© 2022 Unitech Electronics Co., Ltd. All rights reserved.
Unitech is a registered trademark of Unitech Electronics Co., Ltd.
All product and company names are trademarks, service marks, or registered trademarks of their respective owners
TS100 User’s Manual
2.9 Function Code Transmit
All ASCII control characters are translated into CTRL+ASCII functions if you
enable Function Code Transmit.
Otherwise, they are translated into predefined keystrokes.
Refer to Appendix C: ASCII Table for hexadecimal values of characters.
2.10 Scan Mode
2.10.1 Trigger Mode
If the Trigger Mode is enabled, you can activate the scanner by providing
an external hardware trigger, or using a serial trigger command. When in
manual trigger mode, the scanner scans until a barcode is read, or until
the hardware trigger is released. When in serial mode, the scanner scans
until a barcode has been read or until the deactivate command is sent.
Serial Trigger Command:
Command Trigger:
[0x02][0xF4][0x03]
Command Untrigger:
[0x02][0xF5][0x03]
Manual Trigger Mode
Ctrl+ASCII Functions Disable *
Ctrl+ASCII Functions Enable

Unitech TS100 Specifications

General

Brand	Unitech
Model	TS100
Category	Scanner
Language	English