Copyright 2010 Unitech Electronics Co., Ltd.
All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
English Deutsch Español Français
中文(简体)
中文
(繁體)
日本語
영어
6. Finally, push the tabs inwards to
fix the battery cover.
Turning ON the PA550 for the First Time
After you have initially charged your device for about 16 hours, the device is
ready to work. You can now start up your device, calibrate the display, learn
some basic stylus usage, and set up the system time zone, date and time.
Power ON Button
Turn on your device by pressing the power button on the front panel.
Charging the Battery
CAUTION! Turn ON the backup battery switch before charging the battery.
Data you entered may not be properly stored until the built-in
backup battery has been adequately charged.
1. Connect the USB charging cable to PA550 (1).
2. Plug the AC adapter cable into the power jack of the USB charging cable
(2).
3. Plug the AC adapter cord into an electrical outlet (3).
To Next Page
Loading...
Need help?
General
