Unitech PA600 Programming Manual

-
No meaning for you
Sentinal Esc,0,4,32,m,S1,BCC
No meaning for you
S1 is 0 not send,1 send
Track_selection
Esc,0,4,33,m,S1,BCC
No meaning for you
Here S1 is =0_ALL TRACKS,1 TRACK1 AND TRACK2,2
TRACK1 AND TRACK3,3 TRACK2 AND TRACK3,4
TRACK1,5 TRACK2,6 TRACK3
T2_account_only
Esc,0,4,34,m,S1,BCC
No meaning for you
S1 is 0_NO,1 YES
Separator Esc,0,4,35,m,S1,BCC
No meaning for you
S1 is 1 CHARACTER
Must_have_data
Esc,0,4,36,m,S1,BCC
No meaning for you
S1 is 0 YES,1_NO
Track1_sequence Esc,0,L,37,m,S1,…Si,BCC
No meaning for you
Si can be 1 to 16 CHARACTERS
Track2_sequence Esc,0,L,38,m,S1,…Si,BCC
No meaning for you
Si can be 1 to 8 CHARACTERS
Code39_set Esc,0,4,39,m,S1,BCC S1.B0 is for Code39_enable,S1.B1 is for
Code39_standard,S1.B3B2 for Code39_cd,S1.B4 Code39_ss
Code39_enable
Esc,0,4,3a,m,S1,BCC S1 is 0 disable,1_enable
Code39_sandard
Esc,0,4,3b,m,S1,BCC S1 is 0_full ASCII,1 standard
Code39_cd: Esc,0,4,3c,m,S1,BCC S1 is 0 calculate&send,1 calculate&not send,2_not calculate
Code39_ss Esc,0,4,3d,m,S1,BCC Here S1 is 0 SS send,1_SS not send
Code39_min Esc,0,4,3e,m,S1,BCC S1 is 0~48:0 (min<=data len)
Code39_max Esc,0,4,3f,m,S1,BCC S1 is 0~48:48 (data len<=max)
I2of5_set Esc,0,4,40,m,S1,BCC S1 is S1.B0 is for I2of5_enable,S1.B1 is for
I2of5_fixlength,S1.B3B2 is for I2of5_cd,S1.B5B4 is for
I2of5_ss
I2of5_enable
Esc,0,4,41,m,S1,BCC S1 is =0 disable,1_enable
I2of5_fixlength
Esc,0,4,42,m,S1,BCC S1 is =0 on,1_off (record first 3 record len)
I2of5_cd Esc,0,4,43,m,S1,BCC S1 is =0 calculate&send,1 calculate&not send,2_no calculation
I2of5_ss Esc,0,4,44,m,S1,BCC S1 is 0 first digit suppressed,1 last digit suppressed,2_not
supressed
I25_min Esc,0,4,45,m,S1,BCC S1 is 2~64:10 (min<=data len)
I25_max Esc,0,4,46,m,S1,BCC S1 is 2~64:64 (data len<=max)
S2of5_set Esc,0,4,47,m,S1,BCC S1 is S1.b0 is for S2of5_enable,S1.b1 is for
S2of5_fixlength,S1.b3b2 is for S2of5_cd
S2of5_enable
Esc,0,4,48,m,S1,BCC S1 is 0_disable,1 enable
S2of5_fixlength
Esc,0,4,49,m,S1,BCC S1 is 0_on,1 off (record first 3 record len)
S2of5_cd Esc,0,4,4a,m,S1,BCC S1 is 0 calculate&send,1 calculate&not send,
2_not calculate
S25_min Esc,0,4,4b,m,S1,BCC S1 is 1~48:4 (min<=data len)
S25_max Esc,0,4,4c,m,S1,BCC S1 is 1~48:48 (data len<=max)
Code32_set
Esc,0,4,4d,m,S1,BCC S1 is S1.b0 is for Code32_enable,S1.b1 is for
Code32_sc,S1.b2 is for Code32_lc
Code32_enable
Esc,0,4,4e,m,S1,BCC S1 is 0_disable,1 enable
Code32_sc Esc,0,4,4f,m,S1,BCC S1 is 0_leading char send,1 not send
Code32_lc Esc,0,4,50,m,S1,BCC S1 is 0_tailing char send,1 not send
Telepen Esc,0,4,51,m,S1,BCC
S1 is S1.b0 is for Telepen_enable,S1.b1 is for
Telepen_charset
Telepen_enable
Esc,0,4,52,m,S1,BCC S1 is 0_disable,1 enable
Telepen_charset
Esc,0,4,53,m,S1,BCC S1 is 0_standard,1 numeric
Ean128 Esc,0,4,54,m,S1,BCC S1 is S1.b0 is for Ean128_id, S1.b1 is for Ean128_id
Ean128_enable
Esc,0,4,55,m,S1,BCC S1 is 0 disable,1_enable
Ean128_id Esc,0,4,56,m,S1,BCC S1 is 0 ID disable,1_ID enable
Ean128_func1
Esc,0,4,57,m,S1,BCC S1 is 1 char
Code128 Esc,0,4,58,m,S1,BCC S1 is 0 disable,1_enable
Code128_min Esc,0,4,59,m,S1,BCC S1 is 1~64:1 (min<=data len)
Code128_max Esc,0,4,5a,m,S1,BCC S1 is 1~64:64 (data len<=max)
Msi_pleasey Esc,0,4,5b,m,S1,BCC S1 is S1.b0 is for Msi
_p_
enable,S1.b1 is for Msi
_p
lease
y_
cd,

Unitech PA600 Specifications

System Memory

SDRAM memory	64 MB
Flash ROM	128 MB
Flash ROM with WWAN	320 MB

Display

display resolution	240x320 QVGA
display type	Color Transflective TFT
touch screen	Yes

Power

main battery	3.7V 1950mAh Li-Ion Battery Pack
backup battery	One Rechargeable Ni-MH Backup Battery
power source	Main Battery

Operating Environment

operating temperature	32ºF to 122ºF (0ºC to 50ºC)
storage temperature	-4ºF to 140ºF (-20ºC to 60ºC)
relative humidity	5% ~ 95% (non-condensing)

Weight and Dimensions

weight	290g with Battery & Scan Engine
length	149.5 mm
height	26.6 mm