Unitech PA600 Programming Manual

-
S1.b3b2 is for Msi_p_cdmode
Msi_p_enable
Esc,0,4,5c,m,S1,BCC S1 is 0_disable,1 enable
Msi_pleasey_cd
Esc,0,4,5d,m,S1,BCC S1 is 0 check digit send,1_not send
Msi_p_cdmode
Esc,0,4,5e,m,S1,BCC S1 is 0 check digit double module 10,1 check digit module 11
plus 10,2 check digit single module 10
Msi_pleasey_min
Esc,0,4,5f,m,S1,BCC S1 is 1~64:1 (min<=data len)
Msi_pleasey_max
Esc,0,4,60,m,S1,BCC S1 is 1~64:64 (data len<=max)
Code93 Esc,0,4,61,m,S1,BCC S1 is 0 disable,1_enable
Code93_min Esc,0,4,62,m,S1,BCC S1 is 1~48:1 (min<=data len)
Code93_max Esc,0,4,63,m,S1,BCC S1 is 1~48:48 (data len<=max)
Code11 Esc,0,4,64,m,S1,BCC S1 is S1.b0 is for Code11_enable,S1.b1 is for
Code11_cdnumber,S1.b2 Code11_cdsend
Code11_enable
Esc,0,4,65,m,S1,BCC S1 is 0_disable, 1 enable
Code11_cdnumber
Esc,0,4,66,m,S1,BCC S1 is 0 one check digit,1_two check digits
Code11_cdsend
Esc,0,4,67,m,S1,BCC S1 is 0 check digit send,1_not send
Code11_min Esc,0,4,68,m,S1,BCC S1 is 1~48:1 (min<=data len)
Code11_max Esc,0,4,69,m,S1,BCC S1 is 1~48:48 (data len<=max)
Codabar_set
Esc,0,4,6a,m,S1,BCC S1 is S1.b0 is for Codabar_enable, S1.b1 is for Codabar_ss,
S1.b3b2 is for Codabar_cd, S1.b4 is for Codabar_CLSI
Codabar_enable
Esc,0,4,6b,m,S1,BCC S1 is 0_disable,1 enable
Codabar_ss Esc,0,4,6c,m,S1,BCC S1 is 0 start&stop char send,1_not send
Codabar_cd Esc,0,4,6d,m,S1,BCC S1 is 0 check digit calculate&send,1 check digit calculate but
not send,2_check digit not calculate
Codabar_CLSI
Esc,0,4,6e,m,S1,BCC S1 is 0 CLSI format on,1_off
Codabar_min Esc,0,4,6f,m,S1,BCC S1 is 3~48:3 (min<=data len)
Codabar_max Esc,0,4,70,m,S1,BCC S1 is 3~48:48
Label_code
Esc,0,4,71,m,S1,BCC S1 is S1.b0 is for Label_c_enable,S1.b1 is for Label_code_cd
Label_c_enable
Esc,0,4,72,m,S1,BCC S1 is 0_disable,1 enable
Label_code_cd
Esc,0,4,73,m,S1,BCC S1 is 0 check digit send,1 not send
Upc_a_set
Esc,0,4,74,m,S1,BCC S1 is S1.b0 is for Upc_a_enable,S1.b1 is for Upc_a_ld,S1.b2
is for Upc_a_cd
Upc_a_enable
Esc,0,4,75,m,S1,BCC S1 is 0 disable,1_enable
Upc_a_ld Esc,0,4,76,m,S1,BCC S1 is 0_leading digit send,1 not send
Upc_a_cd Esc,0,4,77,m,S1,BCC S1 is 0_check digit send,1 not send
Upc_e_set
Esc,0,4,78,m,S1,BCC S1 is S1.b1 is for Upc_e_enable,S1.b2 is for Upc_e_ld,S1.b3
is for Upc_e_cd,S1.b4 is for Upc_e_expand,S1.b0 is for
Upc_e_nsc
Upc_e_enable
Esc,0,4,79,m,S1,BCC S1 is 0 disable,1_enable
Upc_e_ld Esc,0,4,7a,m,S1,BCC S1 is 0_leading digit send,1 not send
Upc_e_cd Esc,0,4,7b,m,S1,BCC S1 is 0 check digit send,1_not send
Upc_e_expand
Esc,0,4,7c,m,S1,BCC S1 is 0 zero expansion on,1_off
Upc_e_nsc Esc,0,4,7d,m,S1,BCC S1 is 0_disable,1 enable
Ean_13_set
Esc,0,4,7e,m,S1,BCC S1 is S1.b0 is for Ean_13_enable,S1.b1 is for
Ean_13_ld,S1.b2 is for Ean_13_cd,S1.b3 is for
Ean_13_bookland
Ean_13_enable
Esc,0,4,7f,m,S1,BCC S1 is 0 disable,1_enable
Ean_13_ld Esc,0,4,80,m,S1,BCC S1 is 0_leading digit send,1 not send
Ean_13_cd Esc,0,4,81,m,S1,BCC S1 is 0_check digit send,1 not send
Ean_13_bookland
Esc,0,4,82,m,S1,BCC S1 is 0 bookland EAN enable,1_ disable
Ean_8_set
Esc,0,4,83,m,S1,BCC S1 is S1.b0 is for Ean_8_enable,S1.b1 is for Ean_8_ld,S1.b2
is for Ean_8_cd
Ean_8_enable
Esc,0,4,84,m,S1,BCC S1 is 0 disable,1_enable
Ean_8_ld Esc,0,4,85,m,S1,BCC S1 is 0_leading digit send,1 not send
Ean_8_cd Esc,0,4,86,m,S1,BCC S1 is 0_check digit send,1 not send
Supplement_set
Esc,0,4,87,m,S1,BCC S1 is S1.b0 is for Supplement_two, s1.b1 is for
Su
pp
lement
_
five,S1.b2 is for Su
pp
lement
_
mh, S1.b3 is for

Unitech PA600 Specifications

System Memory

SDRAM memory	64 MB
Flash ROM	128 MB
Flash ROM with WWAN	320 MB

Display

display resolution	240x320 QVGA
display type	Color Transflective TFT
touch screen	Yes

Power

main battery	3.7V 1950mAh Li-Ion Battery Pack
backup battery	One Rechargeable Ni-MH Backup Battery
power source	Main Battery

Operating Environment

operating temperature	32ºF to 122ºF (0ºC to 50ºC)
storage temperature	-4ºF to 140ºF (-20ºC to 60ºC)
relative humidity	5% ~ 95% (non-condensing)

Weight and Dimensions

weight	290g with Battery & Scan Engine
length	149.5 mm
height	26.6 mm