3
A. BATTERY REPLACEMENT:
This system needs no specific maintenance beyond remote control battery replacement.
The 2-way remote is powered by a 1.5V AAA battery. The 1-way remote is powered by
a pair of 3V, CR2016 batteries.
Battery Level Indicator (2-way remote)
The Battery Level indicator has three level indicators that serve as a visual indication of
battery charge. When the battery reaches a low charge level that requires replacement,
the remote control will generate a single notification chirp, and the Battery Level
indicator
will flash continuously.
Gently pull the end of the battery door away from the top of the remote control then slide
the door up to expose the battery and remove the expired battery. Place the new battery
into the remote. When power is returned the rem ote control will display all icons in the
LCD and generate all beeper tones once. Press any button on the remote to terminate
the beeper tone review.
B. STANDARD LCD ICON CONFIGURATIONS:
The lock icon will be displayed
when the door locked.
The unlock icon will be displayed
when the door unlock
Sensor Bypass
Sensor 1 bypass under Arm
mode
Hidden Alarm Mode
The security system arm with
hidden
alarm function (silent alarm)
Valet Mode
Remote start and alarm
functions shall
be temporarily on hold.
Hood Trigger
Hood is illegally opened (Zone
1)
Trunk Trigger
Trunk is illegally opened (Zone 2)
Door Open Warning
Doors are illegally opened
(Zone 3)
Sensor Trigger
Trigger on Sensor 1 (Zone 4)
Ignition Trigger
Ignition switch is illegally
turned on (Zone5)
System trigger
Remote Transmission
You are transmitting the
signal to control
unit
In – Range Indicator
You are within the range of
the remote
control.
Anti Car-Jack Mode
Activate the anti car-jacking
mode
Icon flash under check mode
Engine Cranking
Your vehicle engine
Engine Running
Your vehicle's engine is
To Next Page
Loading...
Need help?
General
