External Dimensions
Mounting Procedure
Mounting Cautions :
(1) Use this instrument within the following ambient temperature and ambient humidity.
Allowable ambient temperature: 0 to 50°C
Allowable ambient humidity: 45 to 85% RH
(2) Avoid the following when selecting the mounting location.
Rapid changes in ambient temperature which may cause condensations.
Corrosive or inflammable gases.
Direct vibration or shock to the mainframe.
Water, oil, chemicals, vapour or steam splashes.
Excessive induction noise, static electricity, magnetic fields or noise.
Direct air flow from an air conditioner.
Exposure to direct sunlight.
Excessive heat accumulation.
z
z
z
z
z
z
z
z
z
z
To Next Page
Loading...
