EasyManua.ls Logo

UNITED UWM-7104 - User Manual

UNITED UWM-7104
32 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
UWM-7104
Washing Machine / User Manual
EN

Table of Contents

Questions and Answers

  • A
    Andrea MarquezAug 17, 2025
    How to fix UNITED UWM-7104 that won't start?
    • M
      Mark FranklinAug 17, 2025
      If your UNITED Washer machine does not start, several factors could be the cause. Ensure the machine is properly plugged in and check that the fuses are not faulty, replacing them if necessary. Verify that there is mains power supply. Also, make sure you have pressed the Start/Pause button and that the program dial is not in the ‘stop’ position; turn it to the desired setting. Finally, ensure that the machine door is completely closed.
  • K
    Kim PhillipsAug 19, 2025
    Why is my UNITED UWM-7104 not taking in water?
    • O
      Olivia JonesAug 19, 2025
      If your UNITED Washer isn't intaking water, start by ensuring the water tap is fully turned on. Check the water inlet hose for any twists and untwist it if necessary. Inspect the water inlet hose and inlet filters for clogs, cleaning them if found. Also, ensure that the machine door is completely closed.
  • N
    nwebbAug 22, 2025
    What to do if my UNITED UWM-7104 Washer does not discharge water?
    • L
      Latoya StephensAug 22, 2025
      If your UNITED Washer isn't discharging water, check the drain hose for any clogs or twists, and clean or untwist it as needed. Also, inspect the pump filter for clogs and clean it. Ensure that your laundry is spread evenly inside the drum.
  • H
    Hunter LeeAug 25, 2025
    How to stop my UNITED Washer from vibrating?
    • S
      Shawn ThomasAug 26, 2025
      If your UNITED Washer is vibrating, make sure the feet are properly adjusted to stabilize the machine. Check for and remove any transit bolts that were fitted for transportation. Avoid overloading the machine with laundry and ensure the laundry is evenly spread inside the drum. Also, ensure the washing machine is not placed on a hard surface.
  • S
    Sara ThomasAug 27, 2025
    Why is there so much foam in my UNITED UWM-7104 Washer detergent drawer?
    • K
      kevin08Aug 28, 2025
      If excessive foam is forming in the detergent drawer of your UNITED Washer, it's likely due to using too much detergent or using the wrong type. To stop the foam, press the Start/Pause button, then dilute one tablespoon of softener into 1/2 liter of water and pour it into the detergent drawer. Press the Start/Pause button again after 5-10 minutes. Ensure you only use detergents specifically produced for automatic washing machines in the future.
  • C
    Craig BeardAug 30, 2025
    Why is my UNITED Washer not cleaning clothes properly?
    • E
      Erin EdwardsAug 31, 2025
      If the washing result from your UNITED Washer is unsatisfactory, it could be due to several reasons. If your laundry is heavily soiled, select a more appropriate program using the information in the program tables. Ensure you are using a sufficient amount of detergent as instructed on the packaging. Also, verify that you have not exceeded the maximum laundry capacity for the selected program.
  • J
    Jill WyattSep 2, 2025
    Why does my UNITED UWM-7104 discharge water immediately after loading?
    • A
      Ashley NortonSep 2, 2025
      If your UNITED Washer immediately discharges water as soon as it's loaded, it's likely that the end of the water drain hose is positioned too low. Check that the drain hose is at a suitable height.
  • C
    Christina WeaverSep 5, 2025
    How to remove detergent residue from UNITED UWM-7104 Washer?
    • J
      John BautistaSep 5, 2025
      If your UNITED Washer leaves detergent residue on your laundry, it may be due to non-dissolving particles in some detergents appearing as white spots. Perform an extra rinse cycle to remove the residue, or clean your laundry with a brush after it dries.
  • A
    Allison MclaughlinSep 7, 2025
    Why are there grey spots on my laundry after washing in UNITED Washer?
    • S
      Samantha SanchezSep 7, 2025
      If grey spots appear on the laundry after washing in your UNITED Washer, it indicates there is untreated oil, cream, or ointment on your laundry. Use the amount of detergent as instructed on the packaging in the next wash.
  • J
    Jeffrey FitzgeraldSep 12, 2025
    Why is the spin cycle delayed in my UNITED UWM-7104?
    • M
      michael21Sep 12, 2025
      If the spin cycle in your UNITED Washer does not start or starts later than expected, it may be because the Unbalanced load control system has been activated. This system attempts to spread the laundry evenly. The spinning cycle will begin once your laundry is spread. For the next wash, load the drum evenly.

Summary

SAFETY INSTRUCTIONS

General Safety Warnings

Provides essential safety information and warnings for operating the washing machine.

During Use

Details important guidelines and precautions to follow while using the washing machine.

Packaging and Environment

Information on handling packaging materials and environmental considerations.

Savings Information

Tips and advice for optimizing energy and water efficiency during operation.

TECHNICAL SPECIFICATIONS

General Appearance

Diagram and labels identifying the main external components of the washing machine.

Technical Specifications

Lists key technical data, dimensions, power requirements, and capacity.

INSTALLATION

Removing the Transit Bolts

Step-by-step guide on how to remove transit bolts before operating the machine.

Adjusting the Feet; Adjusting Adjustable Stays

Instructions for leveling the washing machine using its adjustable feet.

Electrical Connection

Guidance on connecting the washing machine safely to the electrical mains supply.

Water Inlet Hose Connection

Detailed steps for connecting the water inlet hose to the machine and water supply.

Water Discharge Connection

Instructions for correctly connecting the water drain hose to a standpipe or sink.

CONTROL PANEL OVERVIEW

Detergent Drawer

Details the different compartments within the detergent drawer and their uses.

Sections

Explains the function of each compartment in the detergent drawer for various detergents.

Program Dial

Describes how to select wash programmes using the main programme dial.

Electronic Display

Explains the symbols and indicators shown on the electronic display panel.

USING YOUR WASHING MACHINE

Preparing Your Laundry

Guidance on sorting, checking, and preparing laundry items before washing.

Putting Laundry in the Machine

Instructions on how to load laundry into the drum evenly and avoid overloading.

Adding Detergent to the Machine

Guidance on selecting and adding the correct amount of detergent for different washes.

Operating Your Machine

Steps to follow to start and operate the washing machine for a cycle.

Selecting a Programme

How to choose the most suitable wash programme from the available options.

Half-Load Detection System

Information about the automatic half-load detection and its benefits.

Additional Functions

Details on various additional functions like temperature, spin speed, and special programs.

Child Lock

How to activate and deactivate the child lock feature to prevent misuse.

Cancelling the Programme

Steps to follow to cancel a running wash programme and drain the machine.

Programme End

What to do when the wash programme has finished, including opening the door.

PROGRAMME TABLE

Important Informations

Key recommendations regarding detergent use, periodic cleaning, and door operation.

CLEANING AND MAINTENANCE

Warning

Crucial safety warnings to observe before performing any cleaning or maintenance.

Water Inlet Filters

Instructions on how to locate, clean, and maintain the water inlet filters.

Pump Filter

Step-by-step guide on how to clean the pump filter to ensure proper drainage.

Detergent Drawer

Procedure for removing and cleaning the detergent drawer to prevent residue buildup.

FLUSH STOPPER; BODY; DRUM

TROUBLESHOOTING

AUTOMATIC FAULT WARNINGS AND WHAT TO DO

UNITED UWM-7104 Specifications

General IconGeneral
Loading TypeFront Load
Washing Capacity7 kg
Spin Speed1000 RPM
Energy RatingA++
Weight62 kg
ColorWhite
Dimensions (HxWxD)850 x 600 x 550 mm

Related product manuals