Unitron Moxi2 User Manual

24 25
Using the telephone
As telephones do not all work the same, you
may experience dierent results from dierent
phones. You can use many phones by simply
holding the receiver to your ear, without the
need to change to a dedicated telephone
program on your hearing aid. You may need to
move the handset slightly up or back to nd the
position that sounds best to you.
Depending on the phone type you use, your
hearing healthcare professional might have
selected a dedicated phone program on your
hearing aids. Your hearing aids may have an
automatic telephone program (easy-t feature),
which automatically switches to a dedicated
telephone program when a telephone receiver
is brought close to one of your hearing aids. You
will hear a short melody to indicate you are in
the telephone (easy-t) program.
When the receiver is moved away from the
hearing aid, it will automatically return to the
previous listening program. If the hearing aid
does not switch to the telephone program
1.
2.
3.
automatically when the telephone receiver is
held to the ear, the magnet for easy-t hearing
aids should be attached to the telephone
receiver. The magnet is designed to strengthen
the magnetic eld at the ear piece of hearing
aid compatible telephones.
To ax the optional magnet:
1. Clean the telephone receiver.
Hold the magnet near
the “listening end” of your
telephone receiver and release
it. The magnet will flip to the
appropriate side and seek
the optimal position on the
telephone receiver.
2. Place the double-sided tape
in this optimal position on the
telephone receiver.
3. Attach the magnet to the tape.

Unitron Moxi2 Specifications

General

Brand	Unitron
Model	Moxi2
Category	Hearing Aid
Language	English