Unitron Moxi2 User Manual

12 13
Replacing the battery
1. Gently swing out the battery
door with your ngernail.
2. Grasp the battery with your
thumb and index nger and
remove.
3. Insert the new battery into the
battery compartment with the
plus (+) sign on the battery
facing the same way as the
plus (+) sign on the edge of
the battery door. This will
ensure that the battery door
closes properly.
Note: If the battery is inserted
incorrectly, the hearing aid will
not turn on.
4. Close the battery door.
1.
2.
3.
4.
Caring for batteries
Always discard batteries in a safe and
environmentally friendly way.
To prolong battery life, remember to turn your
hearing aids o when not in use, especially
when asleep.
Remove the batteries and keep the battery door
open while hearing aids are not being worn,
especially when asleep. This will allow internal
moisture to evaporate.

Unitron Moxi2 Specifications

General

Style	Receiver-In-Canal (RIC)
Channels	16
Battery Size	312
Gain	Up to 70 dB
Battery Life	Up to 7 days
Programs	4
Water Resistance	IP68
Noise Reduction	Yes
Feedback Cancellation	Yes
Wireless Connectivity	Bluetooth

Summary

Your hearing aids at a glance

Hearing aid components

Warnings

Magnet warnings

Information regarding safe use of magnets with hearing aids and potential interference.

Putting your hearing aids on your ears

Fitting methods

Instructions for fitting hearing aids with domes and custom shells into the ear.

Turning your hearing aids on and off

Battery information

Low battery warning

Tips for wearing hearing aids for the first time

Operating instructions

Push button controls

Using the telephone

Protecting your hearing aids

Cleaning your hearing aids

Signature features of your hearing aids

Troubleshooting guide

Warning to hearing aid dispensers (to comply with the U.S. Food and Drug Administration (FDA) regulations)

Compliance information