14 15
Replacing the battery in hearing aids with a
tamper-resistant battery door
Some hearing aids have a tamper-
resistant battery door for safety
reasons. To replace the battery,
open the battery compartment
and push the locking piece back
inside the hearing aid using the
tip of a pen.
Remove the old battery. Insert a
new one with the plus (+) sign on
the battery facing the same way
as the plus (+) sign on the side of
the battery door. The new battery
will be secured when you close
the battery door.
2.
3.
1.
Replacing the battery
1. Gently swing out the battery
door with your ngernail.
2. Grasp the battery with your
thumb and index nger and
remove.
3. Insert the new battery into the
battery compartment with the
plus (+) sign on the battery
facing the same way as the
plus (+) sign on the side of the
battery door. This will ensure
that the battery door closes
properly.
Note: If the battery is inserted
incorrectly, the hearing aid will
not turn on.
4. Close the battery door.
2.
3.
1.
4.
To Next Page
Loading...
Need help?
General
