46 47
Cause Possible remedy
Weak on the telephone
Telephone not positioned
properly
Move telephone receiver
around ear for clearer
signal. See “Using the
telephone”
Hearing aid requires
adjustment
Consult your hearing
healthcare professional
For any problems not listed in the guide, contact your
hearing healthcare professional.
Information and explanation of symbols
xxxx
The CE symbol is a conrmation by Unitron that this
Unitron product meets the requirements of the R&TTE
Directive 1999/5/EC on Radio and Telecommunication
Terminal Equipment. The numbers aer the CE symbol
are the numbers of the consulted certied bodies
under the above mentioned directives.
This symbol indicates that it is important for the user to
read and take into account the relevant information in
this user guide.
This symbol indicates that it is important for the user
to pay attention to the relevant warning notices in this
user guide.
Important information for handling and product safety.
Australian EMC and Radiocommunications compliance
label.
This symbol indicates that the products described in
these user instructions adhere to the requirements for
an application part of Type B of EN 60601-1. The surface
of the hearing aid is specied as applicated part of
Type B.
To Next Page
Loading...
Need help?
General
