Unitron Quantum2 HP - Operating Instructions

22 23
SmartFocus 2 (comfort-clarity control)
If the lever has been congured as a
SmartFocus2 control:
• Press up to increase clarity of speech.
• Press down to decrease overall noise or
improve listening comfort.
Each step will change the hearing aid
performance. Sometimes multiple steps are
required to achieve the desired listening results.
Aer each press wait for about 4-5 seconds
to allow the hearing aid to adjust to the new
setting.
As you change the SmartFocus 2 level, your
hearing aids will beep.
For more information or details, please see
page 38.
Operating instructions
Your hearing aids come with two controls that
allow you to further adjust them – a lever and a
push button.
Lever
The lever on your hearing aids can be
set up as either a volume control or a
SmartFocus 2 control.
Volume control
If the lever has been congured as a volume
control:
• Press up to increase volume.
• Press down to decrease volume.
As you change the volume level, your hearing
aids will beep.
Volume setting Beeps
Suggested volume level 1 beep
Turning volume up short beep
Turning volume down short beep
Maximum volume level 2 beeps
Minimum volume level 2 beeps