Unitron uDirect 2 Guide

3938
uDirect 2 will announce each active audio source
as you go through the sequence with spoken
notifications or beeps.
Pause streaming
To temporarily interrupt streaming, e.g., if
someone wants to speak to you in person,
briefly press the access (
) button on the
uDirect 2 as many times as needed until you
hear the beeps announcing the previously-active
acoustic hearing aid program.
To resume streaming, briefly press the access
(
) button until your preferred audio source is
found.
Pressing the home ( ) button will always
select the startup programs of your hearing aids,
regardless of the audio source sequence.
Stopping streaming
To stop audio streaming completely, stop the
Bluetooth audio players and unplug the audio
plug or the FM receiver.
Selecting from multiple inputs using the uDirect 2
With only one audio source (e.g., from a Bluetooth
transmitter), each press of the access (
) button
will pause or resume the audio source.
Multiple sound sources
can be accessed
sequentially by pressing
the access (
) button.
After each press, the
uDirect 2 selects the
next connected source in a fixed sequence.
If a source is not connected, the uDirect 2 will
skip over it and proceed to the next source.
After the last connected source in the
sequence, streaming stops and your hearing
aids will resume the previously-active hearing
aid program, indicated by beeps.
Every connected audio source has a fixed place
in the sequence, as shown in the diagram.
Briefly press the access (
) button until you
reach your preferred audio source.
Previously-active
hearing program
3.5 mm plug
(audio jack)
FM
Europlug
Bluetooth
music 1
Bluetooth
music 2

Unitron uDirect 2 Specifications

General

Brand	Unitron
Model	uDirect 2
Category	Hearing Aid
Language	English