7170
Do not disconnect the neckloop while the
uDirect 2 is transmitting signals to your hearing
aids.
For safety reasons, recharge the uDirect 2 only
with chargers supplied by Unitron or with USB-
certified chargers >500 mA.
Do not connect an USB or audio cable exceeding
3 meters (9ft) in length to the uDirect 2.
When the uDirect 2 is not in use, turn it OFF and
store it safely.
Other important information
High-powered electronic equipment, larger
electronic installations and metallic structures
may impair and significantly reduce the
operating range.
If the hearing aids do not respond to the
uDirect 2 because of an unusual field
disturbance, move away from the disturbing
field.
Protect the uDirect 2 from excessive shock and
vibration.
Do not use excessive force when connecting
your uDirect 2 to the different cables.
Protect all openings (microphones, antenna,
audio, FM and charger) from dirt and debris.
Never use a microwave or other heating devices
to dry the uDirect 2.
Clean the uDirect 2 using a damp cloth. Never
use household cleaning products (washing
powder, soap, etc.) or alcohol to clean the
uDirect 2.
The digitally-coded, inductive transmission
technology used in the uDirect 2 is highly
reliable and experiences virtually no interference
from other devices. It should be noted, however,
that when operating the hearing system
near computer equipment, larger electronic
installation or other strong electromagnetic
fields, it may be necessary to be at least 60 cm
(24”) away from the interfering device to ensure
proper operation.
To Next Page
Loading...
Need help?
General
