Unitron uStream - Caller Identification; Spoken Caller Names; Feature Requirements

3130
Using uStream with uTV 
If you have a uTV , you can:
• Stream audio from your TV up to  m
(.) to your hearing aids
• Recharge your uStream in the charging
cradle
Charging your uStream on the charging
cradle
. Ensure the uTV  has the correct charging
cradle for the uStream – see uTV  manual
for details.
. Ensure the uTV  is turned on and place the
uStream into the charging cradle.
. Allow two hours for a full charge.
Pairing uTV  to uStream (not required for
uTV  + uStream bundle)
. Turn on the uTV  and press the pair button
on the back of the uTV.
. Starting with the uStream in the o position,
press and hold the ( ) button and turn the
uStream on. The blue audio indicator will
flash.
. Aer successful pairing, the blue audio
indicator on the uStream and the uTV  will
stop blinking.
Playing back audio from your TV
. Begin playback on your TV.
. Adjust the volume level on the uTV  to a
medium to high level.
. Make minor volume adjustments with the
uStream volume buttons ( ).