Unitronics Jazz JZ20-J-UN20 - Component Specifications; Analog Output Specifications; Program Memory and Execution

JZ20-UA24 / JZ20-J-UA24 / JZ20-UN20 / JZ20-J-UN20
Unitronics
15
Value
Possible Cause
32767
Sensor is not connected to input, or value exceeds the maximum value
-32767
Sensor value is under the minimum value
Analog Outputs
(JZ20-UA24 / JZ20- J-UA24 only)
Number of Outputs
2
Output range
±10V, 4-20mA
Resolution
12-bit sign(8192 units) for ±10V
12-bit (4096 units) for 4-20mA
Conversion time
Synchronized to scan time.
Load impedance
1kΩ minimum—voltage
500Ω maximum—current
Galvanic isolation
None
Accuracy
±0.3%
Display
Type
STN LCD
Illumination backlight
LED, yellow-green, software controlled
(LCD backlight; enables the display to be viewed in the dark)
Display size
2 lines, 16 characters long
Character size
5x8 matrix, 2.95x5.55mm
Keyboard
Number of keys
16 keys, including 10 user-labeled keys
Key type
Metal dome, sealed membrane switch
Slides
Slides may be installed in the operating panel faceplate to
custom-label the keys and logo picture. An extra logo slide is
included. A complete set of blank slides is available by separate
order.
Program
Ladder code memory
48K (virtual)
Execution time
1.5 µSec for bit operations (typical)
Memory bits (coils)
256
Memory integers (registers),
16 bit
256
Timers
64
HMI displays
60 user-designed displays available
Type
Temp. Range
Type
Temp. Range
mV
-5 to 56mV
N
-200 to 1300˚C (-328 to 3214˚F)
B
200 to 1820˚C (300 to 3276˚F)
R
0 to 1768˚C (32 to 3214˚F)
E
-200 to 750˚C (-328 to 1382˚F)
S
0 to 1768˚C (32 to 3214˚F
J
-200 to 760˚C (-328 to 1400˚F)
T
-200 to 400˚C (-328 to 752˚F)
K
-200 to 1250˚C (-328 to 2282˚F)
10. The input analog value represents the temperature value as follows:
Analog Value: 260 Actual measured temperature: 26.0C
11. The analog value can indicate faults as shown below: