Unitronics 1
Samba™ OPLC™ OPLC Installation Guide
SM35-J-R20/SM43-J-R20
SM70-J-R20
12 Digital Inputs, include 1 HSC/Shaft-encoder Input,
2 Analog inputs (only when the digital inputs are set to pnp)
8 Relay Outputs
SM35-J-T20/SM43-J-T20
SM70-J-T20
12 Digital Inputs, include 3 HSC/Shaft-encoder Input,
2 Analog inputs
8 Transistor Outputs
General Description
All of the controllers covered in this guide are micro-OPLCs, rugged programmable logic controllers
that comprise built-in operating panels and on-board I/Os.
Item
SM35-J-R20
SM35-J-T20
SM43-J-R20
SM43-J-T20
SM70-J-R20
SM70-J-T20
On-board I/O Model Dependent
Screen 3.5" Color Touch 4.3" Color Touch 7" Color Touch
Keypad or
Function Keys
None
Programming Com
Port, Built-in
RS232 Yes None None
USB device,
mini-B
None Yes Yes
Com Ports,
separate order,
user-installed
The user may install a CANbus module (V100-17-CAN), and one of the following:
• RS232/RS485 port (V100-17-RS4/V100-17-RS4X)
• Ethernet (V100-17-ET2)
Standard Kit Contents
Item
SM35-J-R20
SM35-J-T20
SM43-J-R20
SM43-J-T20
SM70-J-R20
SM70-J-T20
Controller Yes
Terminal Blocks Yes
Battery Yes (installed) Yes (installed) Yes
Mounting Brackets Yes (2 parts) Yes (4 parts) Yes (6 parts)
Rubber Seal Yes
To Next Page
Need help?
General
