Unitronics Vision V130-T2 User Manual

Unitronics
1
Vision™PLC+HMI
User Guide
V130-33-T2/V130-J-T2
V350-35-T2/V350-J-T2
V430-J-T2
▪ 12 Digital Inputs, including 2 Analog,
3 HSC/Shaft-encoder inputs
▪ 12 Transistor Outputs
General Description
The products listed above are micro-PLC+HMIs, rugged programmable logic controllers that comprise
built-in operating panels.
Detailed Installation Guides containing the I/O wiring diagrams for these models, technical specifications,
and additional documentation are located in the Technical Library in the Unitronics website:
https://unitronicsplc.com/support-technical-library/
Item
V130-T2
V130J-T2
V350-T2
V350J-T2
V430J-T2
On-board I/O
Model Dependent
Screen
2.4"
3.5" Color Touch
4.3" Color Touch
Keypad
Yes
None
Function Keys
None
Yes
Com Port, Built-in
RS232/485
Yes
Yes
Yes*
Yes*
Yes*
USB device,
mini-B
None
None
Yes*
Yes*
Yes*
Com Ports, separate
order, user-installed
The user may install a CANbus port (V100-17-CAN), and one of the following:
• RS232/RS485 port (V100-17-RS4/V100-17-RS4X)
• Ethernet (V100-17-ET2)
• Profibus Slave (V100-17-PB1)
* V430J/V350/V350J comprises both RS232/485 and USB ports; note that only one channel may be used at a time.
Standard Kit Contents
Item
V130-T2
V130J-T2
V350-T2
V350J-T2
V430J-T2
Controller
Yes
Terminal Blocks
Yes
Battery (installed)
Yes
Slides
(2 sets of key labels)
None
Yes
None
Mounting Brackets
Yes (2 parts)
Yes (4 parts)
Rubber Seal
Yes

Unitronics Vision V130-T2 Specifications

General

Brand	Unitronics
Model	Vision V130-T2
Category	Controller
Language	English