Need help?Do you have a question about the Unitronics Vision 280 and is the answer not in the manual?
General| Resolution | 320 x 240 pixels |
|---|---|
| Digital Inputs | 16 |
| Analog Inputs | 4 |
| Analog Outputs | 2 |
| Programming Software | VisiLogic |
| Power Supply | 24V DC |
| Memory | 512 KB |
| RTC | Yes |
| CPU | 32-bit |
| Touch Panel | Yes |
| Communication Ports | RS232, RS485 |
| SD Card | Yes |
| Operating Temperature | 0°C to 50°C |
| Protection Rating | IP65 |
Essential safety information, including danger symbols and guidelines for user and equipment protection.
Crucial warnings regarding product use, liability, and proper disposal procedures.
Step-by-step guide for mounting the controller onto a panel, including earthing.
Specifies voltage, ripple limits, and required external protection for the power supply.
Provides guidelines for safe and effective wiring of the power supply connection.
Covers RS232 port usage, pinout, and connection procedures for data transfer.
Details CANbus port functionality, network setup, and wiring specifications.
To Next Page
