Unitronics UMI-B1 UL Series - Structure Diagram

UMI-B1 UL Series Inverter Product overview
11
2.5 Structure diagram
Figure 2-3 is the layout figure of the inverter (take the inverter of 1HP (0.75kW) as the
example).
6
10
11
12
8
9
7
4
3
5
1
3
2
1
Figure 2-3 Product structure
Serial
No.
Name
Description
1
External keypad port
Connect the external keypad
2
Port cover
Protect the external keypad port
3
Cover
Protect the internal parts and components
4
Hole for the sliding
cover
Fix the sliding cover
5
Trunking board
Protect the inner components and fix the cables
of the main circuit
6
Name plate
See Product Overview for detailed information
7
Potentiometer knob
Refer to the Keypad Operation Procedure
8
Control terminals
See Electric Installation for detailed information
9
Main circuit terminals
See Electric Installation for detailed information
10
Screw hole
Fix the fan cover and fan
11
Cooling fan
See Maintenance and Hardware Fault
Diagnose for detailed information
12
Fan cover
Protect the fan
Note: In above figure, the screws at 4 and 10 are provided with packaging and specific
installation depends on the requirements of customers.