Unitronics V130-33-TR20 User Manual

Unitronics
1
Vision™ OPLC™
V130-33-TR20
Installation Guide
The Unitronics V130-33-TR20 offers the following onboard I/Os:
 12 Digital Inputs, configurable via wiring to include 2 Analog, and 3 HSC/Shaft-encoder Inputs
 6 Relay Outputs
 2 high-speed npn Transistor Outputs
General Description
V130 OPLCs are micro-OPLCs, rugged programmable logic controllers that comprise:
 On-board I/O configuration
 Built-in operating panel containing a 2.4” screen and a keypad
 1 built-in serial port: RS232/RS485
Communications
 Optional: the user may order and
install one or both of the following
modules:
- RS232/RS485/Ethernet
- CANbus
 Communication Function Blocks
include: SMS, GPRS, MODBUS
serial/IP. Protocol FB enables PLC to
communicate with almost any external
device, via serial or Ethernet
communications
V130 supports digital, high-speed, analog,
weight and temperature measurement I/Os via:
I/O Options

On-board I/O configuration

Model-dependent
I/O Expansion Modules
Local or remote I/Os may be added via
expansion port or CANbus.
This mode enables you to:
Information Mode
 View & Edit operand values, COM port settings, RTC and screen
contrast/brightness settings
 Stop, initialize, and reset the PLC
To enter Information Mode, press the <i> button for several seconds.
The Unitronics Setup CD contains VisiLogic software and other utilities.
Programming
Software,
& Utilities

VisiLogic

Easily configure hardware and write both HMI and Ladder control
applications; the Function Block library simplifies complex tasks such
as PID. Write your application, and then download it to the controller
via the programming cable included in the kit.
Utilities
To learn how to use and program the controller, as well as use utilities such
as Remote Access, refer to the VisiLogic Help system.
Includes UniOPC server, Remote Access for remote programming
and diagnostics, and DataXport for run-time data logging.
i4 Automation Ltd - 01480 395256

Unitronics V130-33-TR20 Specifications

General

Brand	Unitronics
Model	V130-33-TR20
Category	Network Router
Language	English

Summary

General Description

Communication Capabilities

Details built-in serial port, optional modules, and communication function blocks.

I/O Configuration and Expansion

Explains support for digital, analog, and high-speed I/Os via onboard configuration or modules.

Information Mode Functionality

Describes how to enter and use Information Mode for viewing and controlling PLC parameters.

Programming Software and Utilities

Covers VisiLogic software for development and utilities for remote access and data logging.

Standard Kit Contents

Safety and Precautions

Danger Symbols

Explains danger symbols and associated warnings for safe operation and handling.

Environmental Considerations

Specifies environmental conditions and installation practices to ensure safe operation.

Panel Mounting Procedure

DIN Rail Mounting

Wiring Guidelines

Wiring Procedure

Step-by-step instructions for using crimp terminals and proper wire preparation.

Input Configuration and Jumpers

Input Jumper Settings

Details jumper settings for configuring digital, analog, and high-speed counter inputs.

I/O Wiring Diagrams

Analog and Relay Output Wiring

Analog Input Wiring

Diagrams for current and voltage analog input wiring configurations.

Relay Outputs

Wiring diagrams for relay outputs and methods to increase contact life span.

Power Supply and Earthing

Power Supply Requirements

Specifies the need for an external 24VDC power supply with specific ratings.

Earthing the OPLC

Guidelines for earthing the controller to maximize system performance and minimize interference.

Communication Port Settings

PLC Port Pinouts

RS232 and RS485 Pinouts

Details pin assignments for RS232 and RS485 communication ports.

RS232 to RS485 Jumper Settings

Instructions for changing communication standards and termination settings via jumpers.

Opening and Closing the Controller

Opening the Controller

Steps for safely opening the controller to access internal components like jumpers.

Changing I/O and Communication Settings

Changing Communication Settings

Procedure for accessing and modifying communication settings using internal jumpers.

Closing the Controller

Instructions for correctly reassembling the controller after internal adjustments.