Unitronics V350-35-RA22

To Next Page

Unitronics 1

Vision™ OPLC™ Installation Guide

V130-33-RA22/V130-J-RA22

V350-35-RA22/V350-J-RA22

V430-J-RA22



12 Digital Inputs, including 1 HSC/Shaft-encoder Inputs,

2 Analog, 2 PT100/TC inputs



8 Relay Outputs



2 Analog Outputs

V130-33-TRA22/V130-J-TRA22

V350-35-TRA22/V350-J-TRA22

V430-J-TRA22



12 Digital Inputs, including 1 HSC/Shaft-encoder Inputs,

2 Analog Inputs, 2 PT100/TC inputs



4 Relay Outputs



2 Analog Outputs



4 high-speed npn Transistor Outputs

General Description

All of the controllers covered in this guide are micro-OPLCs, rugged programmable logic controllers that

comprise built-in operating panels and on-board I/Os.

Item

V130-RA22

V130J-RA22

V130-TRA22

V130J-TRA22

V350-RA22

V350J-RA22

V350-TRA22

V350J-TRA22

V430J-RA22

V430J-TRA22

On-board I/O Model Dependent

Screen 2.4" 3.5" Color Touch 4.3" Color Touch

Keypad Yes None

Function Keys None Yes

Com Port, Built-in

RS232/485 Yes Yes Yes Yes Yes*

USB device,

mini-B

None None None None Yes*

Com Ports, separate

order, user-installed

The user may install a CANbus port (V100-17-CAN), and one of the following:

• RS232/RS485 port (V100-17-RS4/V100-17-RS4X)

• Ethernet (V100-17-ET2)

• Profibus Slave (V100-17-PB1)

* V430J comprises both RS232/485 and USB ports; note that only one channel may be used at a time.

Standard Kit Contents

Item

V130-RA22

V130J-RA22

V130-TRA22

V130J-TRA22

V350-RA22

V350J-RA22

V350-TRA22

V350J-TRA22

V430J-RA22

V430J-TRA22

Controller Yes

Terminal Blocks Yes

Battery (installed) Yes

Slides

(2 sets of key labels)

None Yes None

Mounting Brackets Yes (2 parts) Yes (4 parts)

Rubber Seal Yes

Programming cable

+ RS232 adapter

Yes None

USB

programming cable

None Yes

Main Page

Need help?

Do you have a question about the Unitronics V350-35-RA22 and is the answer not in the manual?

Summary

Alert Symbols and General Restrictions

General Safety Warnings

Important safety warnings and general precautions for using the product.

Wiring

Wiring Safety Precautions

Essential safety guidelines and precautions for electrical wiring.

Wire Termination Procedure

Input Jumper Settings

I;O Wiring

npn (sink) Input Wiring

Wiring diagrams for npn (sink) digital inputs and HSC.

pnp (source) Input Wiring

Wiring diagrams for pnp (source) digital inputs and HSC.

Shaft-Encoder Wiring

Analog Input

Analog Input Wiring

Diagrams and guidelines for connecting analog input signals.

Thermocouple Configuration and Wiring

RTD

RTD (PT100) Configuration and Wiring

Power Supply

Power Supply Requirements

Specifications and connection guidelines for the external power supply.

Power Supply Wiring Precautions

Safety precautions for connecting the power supply wiring.

Earthing the OPLC

Grounding for Performance

Communication

RS232;RS485 Port Overview

RS232;RS485 Pinouts

Setting RS232;RS485 Communication Parameters

V130;V350;V130 J;V350 J Parameter Settings

Jumper settings for configuring RS232 or RS485 communication.

V430 J Parameter Settings

USB Port

USB Port Usage and Safety

Opening the Controller

Controller Opening Safety

Safety precautions before opening the controller.

Changing I;O Settings

Changing Communication Settings

Closing the Controller