Universal Electronics Polaris 1090 User Manual

6. Press PWR. The TV should turn on, then press SET UP to lock the code.
NOTE: If the TV does not turn on during step 6, then slowly press and release CH- to go back through the codes, then
press SET UP when the TV turns on.
7. To search for codes of your other devices, repeat steps 1 through 5, but substitute the appropriate key (e.g., AUX, DVD,
CBL, or STB) for the device you are searching for.
&
&
&
&
&
&
&
Titan&2056&
SEARCHING FOR YOUR CODE
If your home entertainment device does not respond to the Titan Remote Control after trying all of the codes listed for your brand,
or if your brand is not listed at all, try searching for your code. For example, to search for a code for your TV:
1. Turn on your TV.
2. On the remote control, press TV once; it blinks once. Then press and hold SETUP until the TV key blinks twice.
3. Enter 9 9 1. The TV key blinks twice.
4. Enter one of the following four digits:
COMPONENT TYPE
COMPONENT ID #
Set-Top Boxes (Cable, Sat, etc.)
0
TV
1
DVD/VCR/DVR
2
Audio Devices
3
5. Aim the remote control at the TV and press POWER once.

Universal Electronics Polaris 1090 Specifications

General

Brand	Universal Electronics
Model	Polaris 1090
Category	Remote Control
Language	English