Need help?Do you have a question about the Universal Laser Systems VLS3.50 and is the answer not in the manual?
General| Laser Type | CO2 |
|---|---|
| Interface | USB, Ethernet |
| Laser Power Options | 30W, 50W, 75W |
| Engraving Area/Work Area | 610 mm x 457 mm |
| Maximum Part Size | 457 mm |
| Max Material Thickness | 6" (152mm) |
| System Dimensions | 660 mm |
| Power Requirements | 50/60 Hz |
Defines intended use and general safety guidelines to prevent injury and damage.
Details safety measures related to the CO2 laser system.
Safety precautions for both CO2 and Fiber laser systems.
Safety measures when using the optional Class 4 laser module.
Details warning labels placed on the laser system for safety.
Guidance on preparing the installation site, including environment and power.
Outlines computer hardware and operating system requirements.
Instructions for assembling and connecting the laser system components.
Procedure for verifying and adjusting beam alignment.
Provides an overview of the laser system's operation and software components.
Explains the printer driver interface for configuring laser jobs.
Details the materials database tab for setting job parameters.
Explains the manual tab for advanced configuration of laser jobs.
Explains the Air Assist system for material processing and optics protection.
Details the compressed air unit for air assist and optics protection.
Describes the cutting table for supporting materials during cutting.
Allows engraving and marking on cylindrical objects.
Procedures for cleaning the laser system components.
Procedures for inspecting and cleaning optical components.
Procedures for accessing and cleaning cooling fan filters.
Recommended schedule for performing maintenance tasks.
To Next Page
