Universal Remote Control TOTAL CONTROL FX-1 User Manual

14
Press the component button you want to turn on and then the
Power ON button; repeat for all other components in the order
you want them to turn on. The LED light will blink once for each
time you press the Power ON button.
Once you’ve entered all the Power On commands, press
the Channel Up button to save your MacroPower commands.
The component button LED light will blink three times to
confirm that the programming has been successfully saved.
SUGGESTION: Most of the components have the same
signal to turn the power On and Off. You may want to
program MacroPower only in the On button and save the
System Off button to turn components On or Off individually.
Note: If you want to program MacroPower for the power
OFF button, follow the same steps used for Power ON
programming.

Universal Remote Control TOTAL CONTROL FX-1 Specifications

General

Brand	Universal Remote Control
Model	TOTAL CONTROL FX-1
Category	Remote Control
Language	English