15
Erasing Advanced Features
You can erase SimpleSound programming, MacroPower
commands, or re-set the remote to original factory
default settings.
Erasing SimpleSound Commands
Repeat Steps 1-2 to erase SimpleSound commands from
other components.
Press and hold the Component button
you wish to erase volume control from
(such as a DVD or VCR) and the Select
(SEL) button at the same time for about
three seconds until the Component LED
light turns on.
Press the Volume Up button and then the same component
button from Step 1. The component LED light will blink
three times to confirm the erasure.
To Next Page
Loading...
