Universal Remote Control TRC-820 User Manual

Sound
Adjust the button press feedback volume by
pressing the adjacent buttons to your desired level.
The current level is displayed.
Once the sound is adjusted, press the Save
button. Pressing the Exit button will revert to the
remote’s last saved setting.
Pickup
You can set your TRC-820 to turn on
when the remote is picked up. Simply select Yes
(Turn ON) or No (Turn OFF).
Once the pickup is adjusted, press the Save
button. Pressing the Exit button will revert
to the remote’s last saved setting.
Factory Default
WARNING! Only use this button when instructed to by Technical
Support. It resets the memory of the TRC-820 to the factory settings.
All your programming will be lost!
Exit
When you have finished adjusting Settings, simply press the Exit
button to return to normal operation.
Page 8
TRC-820 TWO-WAY REMOTE

Universal Remote Control TRC-820 Specifications

General

Brand	Universal Remote Control
Model	TRC-820
Category	Remote Control
Language	English