Universal Remote Control TRC-820 User Manual

Sleep Timers
Adjust the amount of time that the remote’s
LCD screen and button backlight remain lit.
There are separate settings based on the power
method (battery vs. charger).
Once the Sleep Timers are adjusted, press the
Save button. Pressing the Exit button will revert
to the remote’s last saved setting.
Wireless Network Settings
WARNING! Only use this button when
instructed to by Technical Support or your
Custom Professional. The screen displays
network information about your TRC-820 and
the wireless network it is connected to.
Do not make any changes on this screen!
Brightness
Adjust the screen brightness by pressing the
adjacent hard buttons to increase or decrease
the brightness level. The current level is
displayed.
Once the brightness is adjusted, press the Save
button. Pressing the Exit button will revert
to the remote’s last saved setting.
Note: The higher the brightness, the faster the batteries will deplete.
Page 6
TRC-820 TWO-WAY REMOTE

Universal Remote Control TRC-820 Specifications

General

Brand	Universal Remote Control
Model	TRC-820
Category	Remote Control
Language	English