Page | 25
This sets up three buttons (Volume Up, Volume
Down and MUTE) as a group for that component.
Repeat Steps 1-2 for all other components.
Note: If you do not press a button within 30
seconds, the component light will turn off.
The remote will exit the set up mode, and
you will have to start over with step one.
STEP 3: Press the VOLUME UP [VOL
5
]
button and then press either the TV or AUDIO
Component button that you want to use for
volume. The Component light will blink three
times to confirm that it is saved.
Component Buttons
VOLUME
UP
5
TV BUTTON
To Next Page
Loading...
Need help?
General
