Universal E-40 - Page 16

16
14. Install Batteries in Console
Note: The console uses D size batteries (LR20).
Make sure that the batteries point in the
directionofthe+/–indicatorsinthebattery
bay. If you use rechargeable batteries, the
optional power adapter will not recharge the
batteries.
Donotmixoldandnewbatteries.
Donotmixalkaline,standard(carbon-zinc),or
rechargeable(Ni-Cd,Ni-MH,etc)batteries.
X4
+
–
Optional Power Adapter
The console for your machine can operate on battery power or AC power. For AC power, it is necessary to order the
optional Power Adapter. If batteries and the Power Adapter are installed, the console will use the Power Adapter to
operate.
Note: If you use rechargeable batteries, the optional Power Adapter will not recharge the batteries.
After the machine is fully assembled, connect the Power Adaptor to the console and the wall outlet.
 NOTICE:Ifyouuseapoweradapterforyourmachine,makesurethatthecordstaysclearofthepathofthe
pedals.Attachthecordtothemachineasshown:
NOTICE: It is recommended to remove batteries when they are not used, to avoid damage from battery
corrosion.
ToordertheoptionalPowerAdapter,goto:www.UniversalHomeFitness.com/powersupply
Orcall1(800)605–3369.
15. Final Inspection
Inspect your machine to ensure that all hardware is tight and components are properly assembled.
Be sure to record the serial number in the field provided at the front of this manual.
Do not use or put the machine into service until the machine has been fully assembled and inspected for correct
performance in accordance with the Owner’s Manual.