Universal E-40 - Specifications; Before Assembly

6
Before Assembly
Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a
hard,levelsurface.Allowaworkoutareaofaminimum72”x107”(183cmx272cm).Besurethattheworkoutspaceyou
are utilizing has adequate height clearance, taking into consideration the height of the user and the elliptical machine.
Basic Assembly Tips
Followthesebasicpointswhenyouassembleyourmachine:
1. Read and understand the “Important Safety Instructions” before assembly.
2. Collect all the pieces necessary for each assembly step.
3. Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten, and the left (counter-
clockwise) to loosen, unless instructed otherwise.
4. When attaching 2 pieces, gently lift and look through the bolt holes to help insert the bolt through the holes.
5. The assembly requires 2 people.
Note:Someaxlescontainoil.Usecautiontoavoidstainingclothesorcarpet.
SPECIFICATIONS
Maximum User Weight: 275 lbs. (125 kg)
Power Requirements: 4DBatteries(LR20)–notincluded
OperationalVoltage: 6VDC
Regulatory Approvals:
 OptionalACPowerAdapter:ULlisted,CSAcertied(orequivalent),
Rated120V60HzInput,9VDC,0.5AOutput.Class2orLPS.
This product, its packaging, and components contain chemicals
known to the State of California to cause cancer, birth defects, or
reproductive harm. This Notice is provided in accordance with
California’sProposition65.Ifyouwouldlikeadditionalinformation,
pleaserefertoourwebsiteatwww.nautilus.com/prop65.
56” (142 cm)
64.5” (164 cm)
23.7” (60 cm)