UPG 173RM17A - Image Control

Contrast
The Contrast option displays a slider bar to enable the adjustment of the screen contrast. Contrast
adjustments are more discernible when the background is white.
Image control
The Image control option contains the following sub-menu:
• Display Resolution Mode
a. Fill
b. Aspect
c. 1:1
d. Current Mode
e. Recommended Mode
f. Exit Sub-menu
• Horizontal position
• Vertical position
• Clock
• Phase
• Exit sub-menu
Horizontal position
The H position option displays a slider bar to enable the adjustment of the screen horizontal position.
The center of the bar is obtained from the factory-preset value for Horizontal Position. At value=MIN, the
selection of + positioning response might vary between XGA and FHD panels. This is caused by physical
limitations at MIN OSD placement.
Vertical position
The V position option displays a slider bar to enable the adjustment of the screen's vertical position.
The center of the bar is obtained from the factory-preset value for Vertical Position.
Clock
Phase
The Clock option displays a slider bar to enable the adjustment of the Horizontal Clocks.
The Phase option displays a slider bar to enable the adjustment of the analog signals phase.
DisplayPort will automatically be displayed on UPG KVM Console