Shipping instructions
Keep the original packing box in a storage area in case you must move or ship your UPG 1U Rackmount
Console.
Moving a rack with the UPG 173RM17A Console
installed
When moving the UPG 1U Rackmount Console installed in a rack, UPG recommends that you install the lock
plates (L & R), included in your kit, on each side of the unit and rack.
To install lock plates:
1.
Slide lock plate into the slot on side of unit.
2.
Insert one M6 screw through the hole on the lock plate, and thread into rail.
3.
Repeat steps 1 and 2 to install the other lock plate.
To Next Page
Loading...