UPPAbaby mesa Instruction Book

TABLE OF CONTENTS
BEFORE YOU BEGIN 3
CERTIFICATION 3
USE RECOMMENDATIONS 4
REGISTRATION 5
NOTICE OF EXPIRATION 5
WARNINGS + GENERAL SAFETY INSTRUCTIONS 6
VEHICLE COMPATIBILITY 16
CHOOSING A VEHICLE SEATING LOCATION 16
DETERMINING BEST INSTALLATION METHOD 17
BASE INSTALLATION 17
CARRIER INSTALLATION WITHOUT BASE 17
OVERVIEW OF UAS 18
OVERVIEW OF VEHICLE SEAT BELT SYSTEMS 19
UNSAFE VEHICLE SEAT BELT SYSTEMS + SEATING 20
BASE INSTALLATION WITH LOWER ANCHORS 21
LEVELING BASE 21
BASE INSTALLATION WITH LOWER ANCHORS 22
SAFETY CHECK 24
UNINSTALLING BASE 24
BASE INSTALLATION WITH VEHICLE SEAT BELT 25
LEVELING BASE 25
SECURING THE BASE WITH VEHICLE SEAT BELT 26
SECURING THE BASE (LAP AND SHOULDER BELT INSTALLATION) 26
SECURING THE BASE (LAP BELT ONLY INSTALLATION) 28
SAFETY CHECK 29
UNINSTALLING BASE 29
REAR-FACING SEAT FEATURES 12
OVERVIEW OF BASE 12
OVERVIEW OF CARRIER 14
Read all instructions before use of the rear-facing car seat.
Keep instruction book for future use.
(Storage pocket located on underside of base.)

UPPAbaby mesa Specifications

General

Product Type	Infant Car Seat
Car Seat Weight Without Base	9.9 lbs
Child Maximum Height	32 inches
Installation	LATCH or seat belt
Harness Type	5-point
Safety Standards	FMVSS 213
Compatibility	Compatible with UPPAbaby strollers