UPPAbaby mesa Instruction Book

44 45 UPPAbaby MESA Instruction Book UPPAbaby MESA Instruction Book
FITTING CARRIER TO VISTA 2014 AND EARLIER
FRAME ADAPTERS
STEP 1: Engage and hold the stroller release button on the top of the
carry handle.
STEP 2: Lift the carrier off the adapters on stroller frame.
RELEASING CARRIER FROM VISTA 2014 AND EARLIER
FRAME ADAPTERS
STEP 1: With carrier facing
stroller handle, align carrier stroller
hubs with adapters on stroller.
STEP 2: Let carrier slide onto
adapter posts.
STEP 3: Lift up on carrier handle
to check attachment.
1 2
STROLLER COMPATIBILITY
STROLLER COMPATIBILITY
FITTING ADAPTERS TO VISTA 2014 AND EARLIER FRAME
TO ATTACH: Place adapters (logo facing out) onto seat attachments and
press until you hear a click.
TO REMOVE: Push down release button on backside of adapter and lift
up from stroller frame.
Prior to tting adapter to VISTA 2014 and earlier frame, engage brake
on stroller and remove toddler seat or bassinet from frame.
NOTE: VISTA 2014 and earlier stroller models require adapters for use
with the MESA. Please contact UPPAbaby Customer Service
at (888) 502-5514 x235 for an adapter.
NOTE: There are 2 adapters, one for the left and one for the
right side of the stroller. The adapters are marked with “L” and “R”
respectively. (The left adapter and left side of the stroller are
determined by the driver’s left.
NOTE: Indicators should appear green as conrmation of secure
installation. If the indicator symbol is red then the adapter is not
secure. Remove the adapter and try fastening it again.
ATTACH REMOVE

UPPAbaby mesa Specifications

General

Product Type	Infant Car Seat
Car Seat Weight Without Base	9.9 lbs
Child Maximum Height	32 inches
Installation	LATCH or seat belt
Harness Type	5-point
Safety Standards	FMVSS 213
Compatibility	Compatible with UPPAbaby strollers