uPunch HN3000 User Manual

21
1. When the code “01” appears, use the + and –
buttons to select the hour, then press Enter to
conrm the setting.
After you have set the hour, you will set the minute
for the alarm.
2. Use the + and – buttons to select the minute, then
press Enter to conrm the setting.
After you have set the time, you will set the days of
the week for the alarm.
3. Use the + and – buttons to scroll through the days.
A ashing triangle indicates the day that is currently
selected. The + button moves your selection from
right to left and the – button moves your selection
from left to right. Press the Back button to toggle
each day on or off.
For example, if you would like to enable the alarm
for weekdays only, you will disable the alarm for
Saturday and Sunday. When you see the ashing
triangle on Sunday, press the Back button and the
triangle will be removed. Then press the – button to
select Saturday. When you see the ashing triangle
on Saturday, press the Back button to disable
Saturday. Monday through Friday are still selected.
4. Press Enter to conrm these settings.
Next, you will select which alarm/bell will ring for
this group. The internal alarm is music that the clock
plays; the external bell is purchased separately. The
options are:
01 External bell and internal alarm
02 External bell
03 Internal alarm

uPunch HN3000 Specifications

General

Type	Time Clock
Compatibility	uPunch Time Cards
Display	Digital
Power Source	AC Power
Battery Backup	Yes
Automatic Card Feed	Yes
Automatic Time Alignment	Yes
Mounting	Wall or Desk