37
Setting Lunch/Break Deduction: Number of Hours
Before Break Deduction (code 04)
When the code “04” appears, set the number of
hours that will take place before a deduction is
calculated from daily punches. Use the + and –
buttons to make your selection, then press Enter to
conrm the setting. (Must be used in conjunction
with code 05.)
NOTE: When a break deduction occurs, a “B” will be
printed in the REG column next to the daily time.
Setting Lunch/Break Deduction: Duration of the
Break Deduction (code 05)
When the code “05” appears, set the amount of
time to deduct from a time card’s daily punches for
break or lunch. Use the + and – buttons to make your
selection, then press Enter to conrm the setting.
(Must be used in conjunction with code 04.)
NOTE: When a break deduction occurs, a “B” will be
printed in the REG column next to the daily time.
Setting Daily Overtime (code 06)
When the code “06” appears, specify the number
of hours that will take place before daily time is
considered overtime. Use the + and – buttons to
make your selection, then press Enter to conrm the
setting.
Setting Weekly Overtime (code 07)
When the code “07” appears, specify the number
of weekly hours that will be worked before weekly
time is considered overtime. Weekly overtime is only
based on hours that have not already been calculated
into daily overtime. Use the + and – buttons to make
your section, then press Enter to conrm the setting.
NOTE: This setting can only be used for weekly and
bi-weekly pay periods.
To Next Page
Loading...
Need help?
General
