39
and – buttons to make your selection, then press Enter to
conrm the setting.
Setting the Ringing Time from Group 01 to Group 12
(codes 01–12)
You can set up to 12 different times, or groups, for the
alarm/bell to ring during the work week. Each group is
numbered 01–12. You may not wish to use all 12 alarms. For
example, if you only wish to set alarms for the beginning
and end of a lunch break, you will only set up alarms for
two groups.
1. When the code “01” appears, use the + and –
buttons to select the hour, then press Enter to
conrm the setting.
After you have set the hour, you will set the minute
for the alarm.
2. Use the + and – buttons to select the minute, then
press Enter to conrm the setting.
After you have set the time, you will set the days of
the week.
3. Use the + and – buttons to scroll through the days.
A ashing triangle indicates the day that is currently
selected. The + button moves your selection from
right to left and the – button moves your selection
from left to right. Press the Back button to toggle
each day on or off.
For example, if you would like to enable the alarm
for weekdays only, you will disable the alarm for
Saturday and Sunday. When you see the ashing
triangle on Sunday, press the Back button and the
triangle will be removed. Then press the – button to
select Saturday. When you see the ashing triangle
on Saturday, press the Back button to disable
Saturday. Monday through Friday are still selected.
To Next Page
Loading...
Need help?
General
