Why UREVO Treadmill doesn't work?
If your UREVO Treadmill isn't working, here are a few things to check: * Ensure it's properly connected to the power supply by inserting the plug into the socket. * Verify that the power supply is turned on. * Make sure the safety lock is correctly placed. * Inspect the controller input terminal and signal circuit. * Check if the fuse has blown and replace it if necessary.
What to do if UREVO STROL 3 tread belt slips?
If the tread belt on your UREVO Treadmill is slipping, it's likely that the belt is too loose. You should adjust the tread belt to resolve this issue.
How to fix UREVO Treadmill tread belt not running smoothly?
If the tread belt on your UREVO Treadmill isn't running smoothly, it could be due to insufficient lubrication or the belt being too tight. Try adding methyl silicone lubricant or adjusting the tread belt.
Safety measures for using the treadmill's power supply.
Guidelines for safe assembly and setup of the treadmill.
Identifies all parts of the treadmill with a detailed diagram.
How to use the safety key and prepare the treadmill before use.
Explains console display, buttons, and remote control operation.
Details operating modes and parameter display/setting ranges.
Lists common error codes and their troubleshooting methods.
Procedures for adjusting the tread belt and lubricating the treadmill.
Instructions for cleaning, preserving, and moving the treadmill.
Common treadmill problems, causes, and solutions.
Statement of compliance with relevant EU directives.
General| Motor Power | 2.5 HP |
|---|---|
| Max User Weight | 265 lbs |
| Display | LCD |
| Foldable | Yes |
| Bluetooth Connectivity | Yes |
| Built-in Speakers | Yes |
| Device Holder | Yes |
| Transport Wheels | Yes |
| Incline | Manual 3-level |
| Programs | 12 |
To Next Page
