Urive Classic ... 20 ... User's Guide
09. GUI -Real-time view
#
After booting up to driving mode, real-time view is provided.
#
The view screen shows firmware version, video recording time, image quality, GPS signal state, voice recording
state, product temperature, battery voltage, and recording state(REC, EVT).
#
In the screen setting, enable PIP to see the front and rear view images in PIP.
#
Disable the PIP to see either the front or rear view image. (Default: PIP OFF)
#
Screen saver on: With no action in the real-time view screen, it shifts to the screen saver, which turns off
the LCD in 2 minutes if there is no action again.
#
Screen saver off: With no action in the real-time view screen for 2 minutes, the LCD is turned off.
#
Use the reversal switch of rear camera to horizontally reverse the image.
[Real-time view] [Real-time view - PIP mode] [Screen saver]
To Next Page
Loading...
