7.
#
Cutoff voltage: You can set it by voltage or timer. You can select 5
steps (None, 11.5 V, 11.7 V, 11.9 V, or 12.1 V) for the voltage setting
and 5 steps (None, 6 hr, 12 hr, 24 hr, or 48 hr) for the timer setting.
You can select one steps for the voltage and timer, respectively.
8.
#
Memory space of parking mode: Set the space of the SD card for
parking mode. You are to format the SD card to apply the changed
value. (Options: 0%, 25%, or 50%)
9.
#
Power cutoff because of high temperature: If the temperature
exceeds the LCD warranty temperature for 5 minutes or longer in
parking mode, the black box is shut down.
10.
#
Press the OK button to finish the configuration.
To Next Page
Loading...
