DS1760-031A
19
• A pop-up window opens showing the remaining time of MUTE function
• To stop the MUTE function and reactivate the ringer, press the YES button.
2.18 DOOR OPEN INDICATION
The video door phone has the icon in the upper bar of the display, which indicates whether the
door has remained open on one or more entries. The door open condition is signalled by the call stations
only if the duration of this event is at least 30 seconds.
The function must be enabled by the installer when conguring of the video door phone.
The function is related to the status of the SP terminal of call stations and requires a door open sensor.
ATTENTION! The door open indication is displayed only on video door phones on which door opening
was carried out following the last call received.
In addition to the icon on the display, the LED of the Home key ashes on the video door phone.
When the door or any doors left open are closed, the icon will no longer be visible on the display and the
HomebuttonLEDwillstopashing.
2.19 HOW TO MAKE AN INTERCOM CALL
To make an intercom call with another Video door phone:
• Access the main page of the Video Door Phone application .
• Tap the icon .
• The contact directory is displayed, showing the contacts added by the user.
In order to add a new contact, follow the procedure outlined in section “How to add new contacts to
your address book”.
• To call a contact tap the icon located next to it.
To Next Page
Loading...
Need help?
General
