urmet domus Audio Two - CAMERA UNIT INSTALLATION

sec.5
−−−−
15
ONE-FAMILY AND TWO-FAMILY KITS
DOOR PHONE AND VIDEO DOOR PHONE SYSTEM: Product Technical Manual
Distances are between the TV camera unit and the last monitor. Up
to 100m it is possible to use normal wires; for longer distances, up to
200m, twist the wires A and B.
FROM POWER SUPPLY TO TV CAMERA UNIT
Function Wires m 50m 100m
Power supply 12V~ ~12 S/mm
2
0,5 0,75
Power supply 12V~ ~0 S/mm
2
0,5 0,75
Power supply 18V +18 S/mm
2
0,35 0,35
Power supply 18V R1 S/mm
2
0,35 0,35
CAMERA UNIT
The camera unit is fi tted in a Smyle panel. The unit includes:
• Camera with solid state CCD sensor.
• Infrared LED lights.
• Front panel with 1 or 2 buttons.
• Electronic circuits.
• Name tag light LED.
The internal and external sound volumes can be adjusted by operating
on the proper controls.
INSTALLATION
• Remove the name tag light circuit.
• Extract the door unit from the base.
• Fasten the base onto a fl at wall at the height shown in the fi gure
using either the bolts provided or a 503 box.
• Insert the door unit into the compartment in the based and connect
the wires (it is advisable to have approximately 40-45mm of wire
protruding from the wall).
99 mm 35 mm
185 mm
ø 4 mm
1,55 m ÷ 1,65 mm
Mod. 503
ONE AND TWO-FAMILY VIDEO KIT Mod. 956 WITH ARTICO VIDEO DOOR PHONE
CAMERA UNIT
ONE AND TWO-FAMILY VIDEO KIT Mod. 956 WITH ARTICO VIDEO DOOR PHONE