91
DS1375-020E
12.9.4.5 DATE AND TIME
This section allows forcing the system’s time and the reference Time Zone.
Date and Time are kept by the internal clock and it is necessary to set them only if the system does not feature an
access to the Internet. The system automatically synchronises them as soon as it is able to connect to the public
NTP servers.
12.9.4.6 LICENCES
This section provides a list of the licences installed and allows loading the licence via web.
12.9.5 SYSTEM MAINTENANCE
Through this section it is possible to:
— restart the telephone application;
— restart the Hardware System (soft reboot);
— restart the whole system by performing a Factory Reset (Default Reset);
— activate the automatic restart feature for devices Ref. 1375/82x.
ATTENTION:
the factory reset DELETES any conguration from the machine and all the settings, audio les
and customisations will be lost. ONLY the licence assigned to the system will be kept.
After the Factory Reset it will be necessary to recongure the machine completely.
If telephone or line devices were already connected to the system, perform a factory reset also for the
devices to avoid misalignments in programming.
You can activate the automatic restart feature for 1375/82x devices. With this feature, iPerTAlk will force the
selected devices to restart every 24 hours at the set time.
You can congure this function in the Video door phone system section:
1. activate the automatic restart by enabling the relevant button;
2. set the time at which the restart is to be performed;
3. select the model of the devices to be restarted.
4. press the key
to enable the function.
To Next Page
Loading...
Need help?
General
