Need help?Do you have a question about the urmet domus Miwi 1032/9 and is the answer not in the manual?
General| Brand | urmet domus |
|---|---|
| Model | Miwi 1032/9 |
| Category | Intercom System |
| Language | English |
Technical details for the 1052/10..10D call module with keyboard.
Technical details for the 1052/11..11D call module with keyboard.
Technical details for the 1052/15..15D call module with keyboard.
Technical details for the 1052/16..16D call module with keyboard.
Steps required to access the system's programming interface.
Overview of the programming menu levels and navigation.
Settings for LU line, main setup, password, and module ID.
Options for deleting data and restoring default settings.
Programming user codes, Dallas keys, and service functions.
Settings for advanced features and master/slave configurations.
Procedures for changing the system password and call module ID.
Restoring individual, general codes, and EEPROM memory.
List of error codes detected by call modules and their meanings.
Adjusting call modules using potentiometers P1, P2, P3.
Adjusting call module 1052/13 using potentiometers.
Steps for activating the system in MASTER configuration.
Steps for activating the system in MASTER/SLAVE configuration.
Basic features of the 1752/11 call module with camera.
Basic features of the 1752/16 call module with camera.
Guidance on operating and programming video call modules.
Steps to enter programming mode and understand the menu structure.
Comprehensive list of programming parameters by category.
How to navigate and utilize the programming mode features.
Editing passwords, module IDs, and user code types.
Configuring electrical lock time, calling signal, and conversation limits.
Options for deleting logical codes, Dallas keys, and digitiser data.
Restoring logical user codes and other default settings.
Restoring opening codes, logical codes, and EEPROM memory.
Programming logical user codes and associating them with physical codes.
Configuration of dipswitches for address and video line settings.
Configuration options and technical specifications.
Features and specifications of the video power supply.
Setting physical addresses using dipswitches.
Setting the digitiser's ID number using dipswitches.
Programming and configuration/adjustment of the digitiser.
Instructions for operating the digitiser.
Technical specifications of the switchboard station.
Procedures for entering configuration and editing panel names.
Procedure for restoring the switchboard station to default settings.
List of error messages and their explanations.
Adjusting potentiometers for display contrast and audio.
Wiring diagram for Master/Slave structure with switchboard station.
Settings for video bracket dipswitches and jumpers.
To Next Page