10
DS1723-024
BUTTON CONFIGURATION STAIRS LIGHT
When answering a video door phone call, the user can press the button to switch on the outside lights on
the driveway, possibly in a timed manner, for instance.
When the user presses the button, one of 16 confi gured buttons will be activated.
During the confi guration phase, it is therefore necessary to establish whether and which of the 16 buttons to
activate.
The installer can therefore access to the specifi c confi guration item in home automation and display the following
page:
Tap on the icon you want to associate with the Stairs Light button
(4)
.
If you want to delete an association, tap on the highlighted icon so that no icons are selected.
IMPORTING YOKIS BUTTONS FROM A REMOTE CONTROL OR VIDEO DOOR PHONE
The single Yokis buttons can be confi gured directly by importing them from an eight-button remote control.
See Annex B for how to proceed in detail.
(4) NOTE: Once having associated a home automation button with the Stairs Light function, it will no longer be
editable within the home automation settings (it will be greyed out). So, FIRSTLY confi gure the button (e.g. to
connect it to the module Yokis and set the ON function to turn on the light) and THEN assign it to Stairs Light
function.
To Next Page
Loading...
Need help?
General
