USCutter Laserpoint II User Manual

User Manual & Assembly Instructions
Notes:
This is not the full manual, the assembly instructions have been removed.
The 17" wide double pages have been spit to a screen readable 8.5 x 11".

USCutter Laserpoint II Specifications

General

Brand	USCutter
Model	Laserpoint II
Category	Cutter
Language	English

Summary

Connecting The Cutter To A Computer

Control Panel

Setting the Origin

Define the starting point for the cutter's operations.

Adjusting Speed and Force

Modify cutting speed and force settings on the control panel.

Making Your First Test Cut

Contour Cutting

Laser Calibration

Calibrate the laser for precise alignment with the cutting blade.

Laser Offset Testing

Test the laser's alignment with the pen mark to confirm calibration.

Offset Adjustment

Adjust the laser offset to ensure cuts land in the proper location.

Registering Prints with Cutter

Guide the cutter to recognize registration marks for precise contour cuts.

Troubleshooting

Erratic Cutting or Stoppages

Address issues like erratic cuts, early stopping, or incorrect line placement.

Subsequent Cut Misalignment

Jagged or Warped Cuts

Common Cutting Issues

Perforated or Dashed Cuts

Tapering Cut Lines

Blade Skipping Turns and Corners

Incorrect Corner Cuts