CONTENTS
Section Page
1 Introduction 2
2 Machine specifications 3
3 Installation 3
4 Controls and Component 4
5 Principles of the lamination process 6
6 Warm Up (Without film loaded) 7
7 Loading laminating film 8
8 Warm Up (With film loaded) 16
9 Laminating 17
Cold spots
Curl
Feeding Technique
Side by Side laminating
Thick items
Fan control
Temperature settings
Closing down
Film Removal
Preventing Wrap Around
10 Cleaning 23
11 Manufacturers Recommendations 24
Film Types
Film Gauges
Volumes
Stock Weights
12 Laminating Tips 25
De-curling
Join Splices
13 Fault Finding 26
Poor film adhesion
Laminate Curl
Lack of edge seal down
Creasing
Longitudinal creasing of film
Film sweating
Film shrinkage
Undulations in laminate
Film wrapped around rollers
Film squeal
To Next Page
Loading...
