3
2. MACHINE SPECIFICATIONS
The following chart gives the specifications of the CRL40 model.
CRL40
Max film width 40"
Speed Variable 0 - 13ft/min
Depth 24"
Length 50"
Height 15"
Net weight 154lb
Power Consumption 3000 w
Power supply 220/240 v 50/60Hz
Speed Adjustable
Nip Pressure Factory set
Heat setting Adjustable
Max. film lengths
Film gauges 1.5mil to 5mil
Maximum thickness 1/8"
3. INSTALLATION
3.1 Positioning
The laminator should be positioned on an unobstructed level surface with access to all sides, particularly at
the rear of the machine for the operator to clear the laminated web exiting the machine.
The laminating process uses heat and it is important that the machine is placed in climatically stable area that
is not excessively cold. Do not position the laminator in the direct path of airconditioners, cooling fans, open
doors or similar areas subject to temperature fluctuations.
To Next Page
