Convert Server User Manual www.usr iot
.
c o
m
Jinan USR IOT Technology Limited 37
/
41 tec@usr.cn
Figure
Figure
Figure
Figure 24
24
24
24 Convert
Convert
Convert
Convert Server
Server
Server
Server Network
Network
Network
Network Protocol:
Protocol:
Protocol:
Protocol: TCP/Client
TCP/Client
TCP/Client
TCP/Client
Protocol: UDP
No Server/Client selection required;
Application IP address required: it ’ s target device ‘ s IP address;
Port ID required: 8899 (Default)
Figure
Figure
Figure
Figure 25
25
25
25 Convert
Convert
Convert
Convert Server
Server
Server
Server Network
Network
Network
Network Protocol:
Protocol:
Protocol:
Protocol: UDP
UDP
UDP
UDP
Q5:
Q5:
Q5:
Q5: How
How
How
How to
to
to
to configure
configure
configure
configure transparent
transparent
transparent
transparent serial
serial
serial
serial port
port
port
port application:
application:
application:
application: Two
Two
Two
Two Convert
Convert
Convert
Convert
Server
Server
Server
Server s
s
s
s all
all
all
all configured
configured
configured
configured as
as
as
as
STA
STA
STA
STA
and
and
and
and connection
connection
connection
connection through
through
through
through AP?
AP?
AP?
AP?
Network structure as below figure:
Convert Server 1# Setting: ( We use USR-WIFI232-D2 as AP for this example)
Works as AP mode and all default setting;
Convert Server 2# Setting:
Works as
STA
mode; --See “ Mode Selection Page ”
WAN connection type: Static IP: 10.10.100.100;
--See “ STA Interface Setting Page
”
Network Protocal:TCP/Server, Port ID: 8899;
-- See “ Application Setting Page
”
LAN IP address: 10.10.99.254 (Different net segment with WAN port);
--See “ AP Interface Setting Page
”
Convert Server 3# Setting:
Works as
STA
mode; --See “ Mode Selection Page ”
WAN connection type: Static IP: 10.10.100.101;
--See “ STA Interface Setting Page
”
Network Protocal:TCP/Client, Port ID: 8899; Application IP address: Convert Server 2#
’
s WAN IP
address (10.10.100.100);
-- See “ Application Setting Page
”
To Next Page
Loading...
Need help?
General
